Peer-Reviewed Journal Details
Mandatory Fields
Kennelly, C;Clifford, E;Gerrity, S;Walsh, R;Rodgers, M;Collins, G
2012
January
Water Science And Technology
A horizontal flow biofilm reactor (HFBR) technology for the removal of methane and hydrogen sulphide at low temperatures
Published
WOS: 5 ()
Optional Fields
OXIDATION BIOFILTRATION FILTER H2S
66
1997
2006
A novel horizontal flow biofilm reactor (HFBR) has been adapted and tested for its efficiency in treating hydrogen sulphide (H2S) and methane (CH4) gas. Six pilot-scale HFBR reactors were commissioned, three each treating CH4 and H2S respectively. The reactors were operated at 10 degrees C, often typical of ambient temperatures in Ireland, and were simultaneously dosed with an air mixture containing the gas in question and with synthetic wastewater (SWW). Three reactors (HFBR 1, 2 and 3), treating an air mixture containing CH4, were operated over three phases (Phases 1-3) lasting 180 days in total. During each phase the air mixture flow rate (AFR) and the plastic media top plan surface area (TPSA) loading rate to HFBR 1, 2 and 3 were 1.2 m(3)/m(3)/h and 0.6 m(3)/m(2) TPSA/h respectively. In Phase 1 the reactors were operated in triplicate and were loaded with 8.6 g CH4/m(3) reactor/h (4.3 g CH4/m(2) TPSA/h) and a synthetic wastewater (SWW) similar to domestic sewage at 10 degrees C. During Phase 2 (reactors also operated in triplicate) the effect of temperature on the reactor performance was examined. During Phase 3 the reactors were operated independently in order to examine the effects of omitting organic carbon and adding additional nitrogen in the form of nitrate-nitrogen (NO3-N), rather than ammonium-nitrogen (NH4-N). During Phase 3, CH4 removal efficiencies (RE) of up to 92.8% were achieved at an empty bed retention time (EBRT) of 50 min, equating to a maximum removal of 8.0 g CH4/m(3) reactor/h. Three additional reactors (HFBR 4, 5 and 6) were used to treat an air mixture containing H2S and were loaded at an AFR of 15 m(3)/m(3) reactor/h (7.5 m(3)/m(2) TPSA/h) with an average H2S loading rate of 3.34 g H2S/m(3) reactor/h (1.67 g H2S/m(2) TPSA/h). After 50 days of operation, the RE reached 100% for all three reactors at an EBRT of 4 min. In each reactor, profile samples of biofilm, air and liquid were taken periodically from various regions of the HFBR. These allowed detailed description of removal processes and optimisation of the reactors by detailing changes in air, liquid and biofilm composition as air moved through the reactor.
0273-1223
10.2166/wst.2012.411
Grant Details
Publication Themes