Peer-Reviewed Journal Details
Mandatory Fields
Murray, BR,Doyle, A,Feerick, PJ,Semprimoschnig, COA,Leen, SB,Bradaigh, CMO
2017
October
Materials & Design
Rotational moulding of PEEK polymer liners with carbon fibre/PEEK over tape-placement for space cryogenic fuel tanks
Published
WOS: 1 ()
Optional Fields
Polymers Composites Liners COPVs Cryogenic fuel tanks PEEK MECHANICAL-PROPERTIES ELASTIC-MODULUS NONISOTHERMAL CRYSTALLIZATION GAS-PERMEABILITY DAMAGE NANOINDENTATION COMPOSITES CRYSTALLINITY PERMEATION MODEL
132
567
581
PEEK polymers are investigated as replacement materials for metallic liners in composite overwrapped pressure vessels (COPVs) for fuel tank applications in space. A novel, integrally heated, rotational moulding tool has been developed to produce PEEK polymer liners, samples of which have then been overwrapped using CF/PEEK in a laser assisted tape-placement (LATP) process to produce demonstrator samples of a polymer lined COPV. Helium permeability testing has shown that the designs are capable of resisting leakage to acceptable levels for fuel storage, while X-ray CT scanning and cryogenic cycling have shown that the current design is capable of resisting crack growth over multiple cycles. Nano-indentation testing has shown that the LATP process has created a region of reduced modulus in the PEEK polymer at the surface of the liner where the CF/PEEK has been tape-laid. This laser-affected zone of reduced polymer modulus in the composite interface region has enabled an enhanced resistance to crack growth formations from thermal residual stresses in comparison to hot plate moulded test samples. (C) 2017 Elsevier Ltd. All rights reserved.
10.1016/j.matdes.2017.07.026
Grant Details
Publication Themes